Please review all of our Case Studies products below.
Please review all of our Case Studies products below.
PROBLEM: Customer has been washing and stripping paint from aircraft at this Lake City, FL facility for many years. When an aircraft is being stripped and/or painted, the wash process is a critical component affecting profitability and delivery schedules. …
PROBLEM: A South Carolina's wheel manufacturer's bubble tank was so dirty and contaminated that it was almost impossible to detect equipment leaks. The test tank was laden with contamination coming from the wheels during the manufacturing process. &nb …
PROBLEM: This project was unique in that it was located in Cary, NC, which is one of the strictest wastewater authorities in the state of North Carolina. During construction of a new wash bay facility, a major heavy equipment distributor enlisted our help …
PROBLEM: A major manufacturer of aerospace manifolds in Charlotte, NC had cooling water leak into 3,000 gallons of calibrated hydraulic fluid. The fluid replacement would have meant weeks of down time between procurement, draining, haul off, and start up, …
PROBLEM: A machine tool manufacturer with an average weekly metal pass through of 30,000 lbs per week had been having trouble with oil contamination. This oil contamination resulted in non-uniform hardness, cracking and stained parts. The oil had to be …
PROBLEM: A watercraft manufacturer had a problem with the test tank water getting so contaminated that they had to wash down the hull after each test run. The test tank was laden with carbon, oils, dirt, and hydrocarbons from the test and manufacturing p …
Problem: A plastic injection molding company was experiencing severe particulate and water contamination in their hydraulic oil. The contamination was causing multiple problems including: Sticky Valves Seal Leakage Component Part Failure Increas …
Issue: An aircraft turbofan engine manufacturer has multiple inertial welders which are driven by hydraulic systems. All of the welders had dedicated OEM oil filtration systems installed on them to remove water and contaminants. However, oil contamination …
PROBLEM:: Process water in a manufacturing plant in Massachusetts was contaminated with fuel and industrial oils. The presence of dirt, soil particles and biological growth allowed too much oil to pass through the oil water separator reducing separation e …
PROBLEM: The cutting oil used in a screw machine shop was heavily contaminated with aluminum metal fines. Every month or so, the company was paying to replace five to eight drums of oil with new and have the contaminated oil hauled off. SOLUTION: They …